Paint – Doesn't Fit In

August 12, 2006

Aluminum Wallpaper

After seeing this done on Jonathan Wong’s site, I knew it was something I had to try. The thing dislike the most about this house is the rough wall texture. Not only because it’s ugly but because it holds all the dirt grime of the years. This was a good way to cover at least one wall without scraping and paint.

I used aluminum flashing that was 20 inches wide, a 50 foot roll cost about $30 at Home Depot. I didn’t quite have enough with the first roll and had to buy another. Overall the project went quickly and easily, but I had a few issues. I used liquid nails to glue the panels on the wall but I had an issue with the panels slowing sliding down after I though they were stuck on. About half way though I starting used scotch tape to hold them in place temporarily. There’s also a few dents where the glue and wall touch.

The next step is to move this along the wall where the front door is. I want to make the door invisible from the wall, but I don’t intend to do the whole wall.

December 27, 2005

Kitchen Stage One Complete

It’s been a few months since I moved in and started working on the kitchen remodel so I’m glad to report that Stage 1 is complete. Stage 1 is what you see here, with half of the upper cabinets installed including the appliances. Every bit of it built by me. Stage 2 will complete the kitchen with the rest of the cabinets, paint and tiling.

When I first made the offer on the house I wasn’t initially planning to remodel the kitchen. But after spending a few hours in it, it was clear that I was not going to be happy with the wear and tear that had been put on it for 20+ years. I used Home Depot’s design service to do the design, which turned out to be a good deal. It’s costs $100 for them to come out and do the measurements and plug everything into the computer. They give $100 off materials if you buy from them.

When choosing the materials for the cabinets I looked at both the lowest cost and highest cost cabinets. I’m pretty disappointed at the amount of particle board used in the construction of both version. The lowest cost is totally made of particle board except for the doors and are complete do-it-yourself. Where as the more expensive ones are about 50% particle board and are installed by someone else. I went with Mills Pride cabinets that Home Depot keeps on stock because of their much lower costs, significant in some cases. Despite the fact that they are made of particle board they are of pretty good quality and very easy to assemble. Well worth it for the money I saved. I would say it cost around $1000 for this section of cabinets (the maple doors were as much as the cost of the cabinet boxes, that’s the real expense).

Stage 2 will involve taking down the wall on the right and putting in a cabinets along the bottom (this is where the refrigerator originally was). This will open it up to the living room more. I’ve never pulled down a wall before (just as I never did any of this kitchen work before). I will also probably pull out the original tile back spash and put different tile up. I will finish it up with paint, trim and what ever else will be needed. I figure it will cost about $2000 to finish it up (doing it all myself of course) but don’t know when I will start it. In the mean time check out my Flickr photo set showing the stages of the remodel.

August 6, 2005

My New House

Wow, things happen quickly. I didn’t write about this last week because I really didn’t expect it to go through. I made an offer on a house, about $10K under listed price. This house was a repo and needs some work (not as bad as the others I’ve seen thought). It was a multiple offer situation and I though for sure I wouldn’t come close since people have been paying list price.

I was surprised when I was informed early this week that I had the high offer, but they wanted to get another $5k out of me. No way was I giving them any more, I though my current offer was generous. To make a long story short, I signed the contracts yesterday. It’s mine!

This house is located in the same neighborhood that the other house I made an offer was on. It’s on a 1/2 acre, a nice rectangular 1/2 acre with easy access to be the back yard on both side. The interior needs carpet, paint and is a little dated (was built in the late 70s as far as I can tell), but other than that it’s not in that bad of shape. It also has city water and sewer. Many of the house in this area of Rio Rancho were built before there were hooks and have septic systems or wells. I lucked out there as well.

Over all I’m happy with this purchase so far, I got a deal and it has the basic configuration I was looking for. I have some big plans to add on and will be writing about them here.