Tag: Master Bathroom

Posted on

OMG! I Actually Worked On The Master Bathroom

Last fall, I threatened that I would have the master bathroom completed by the end of the winter. Here it is spring and I did almost nothing to the bathroom. I have a variety of excuses that I wont go into now, however I did finally make some actual progress on it this weekend.

Before I can do anything I need to install the pocket door. Before I install the pocket door I need to relocate the wiring that exists on the wall where the door goes.

Original wiring location

The wiring consists of power in, a wire to the lights controlled by a switch and a power out to a outlet. The good news is the wiring was easy to move to the next wall, it was loose in the attic and there was plenty of room to move it. I thought I would leave the outlet unpowered for now, until I figured out how I was going to rewire everything, apparently the wire to the outlet is also hooked up to the living room.

Temporary wiring location

Now I have a problem that I need to wire that outlet back up, so i have Romex running along the other side of the bathroom along up to the switch. It looks pretty messy and dangerous in the pictures, I know. Trust me it’s safe and temporary.

I need to decide how to wire up a exhaust fan, will it go near the light switch or near the toilet? I also need to figure out if I’m going to use a fancy digital shower control. If so It will use the power from the outlet then I can wire it up properly.

Finally I can install the pocket door. I have the studs marked to cut down, but I’m waiting for some friends to come by and verify my measurements before I screw it all up. I will save the pocket door install for another post.

Posted on

Fun And Excitement With Shower Pan Liners

I wrote perviously about how the shower in the master bathroom had leaked. Now that I have researched the issue more, I understand more about how shower floors are constructed. The original floor was constructed as a “mortar bed” and it was not constructed correctly. It was missing the bottom membrane. The mortar was placed directly on the cement floor. The membrane that was installed was brittle and too far under the top layer of mortar. Finally, there was no strengthening agent, such as chicken wire.

I didn’t want to repeat what I considered a poorly engineered design so I looked into solid surface designs. Royal Stone produces a 48×48 solid surface pre-made floor that resembles stone (think Corian). The normal price is about $900, but my drain is not in the location of the pre-made floor so I would have to order a custom made floor. Since they would have to made a new mold for my application the price would be about $1600 at the cheapest. That’s way too much to spend on just the shower floor.

I then found Tile Redi products which are a thick plastic solid floor that you can tile on directly. Cheaper at $679 (not by much), but not in the size I want and the drain hole isn’t in the same location.

Now I’m back to the mortar floor shower floor as the replacement. Considering the price and how a proper floor is suppose to be built, there should not be a problem for the new floor.